| |
Your
Bonus Program 4.)
Burn CDs With NO PAUSES Between Tracks.
First Musical commandment. "Thou shall not kill
the mood." And now gaps won't kill your musical mood any longer. It took
me 2 years to pull this off.
No pause, no gap, no break
CDs, are awesome for a lot of reasons
Some Beatles and Grateful Dead
recordings had no breaks between tracks.
Live concert recordings have no breaks.
Your own mixes where you fade one song into the next song, crossfades, have no
breaks.
Church ministry tapes have no breaks.
Motivational and spiritual tapes have no breaks.
Books and readings have no breaks.
Presentations have no breaks.
For all of these reasons and more, you want to have no breaks, pauses or gaps
between your tracks. Our Track Trackers don't put in pauses, just breaks so now
you can have no pause CDs from now on. But, you do want to have tracks because
you can't fast forward or rewind a CD.
So, if you don't have tracks, you simply can't jump from place to place. Now you
can have tracks with no audible pause or break at all. Plus this new CD Burner
will also write the new CD Text so that if you have a compatible player you can
actually see the album and track names as you've written them to CDs.
|
Your
Bonus Program 5.)
New Batch Transformer Makes Short Work OF Batch Effects Conversions, MP3
Batch Tagging For An Entire Album & MORE!!!
 |
We've had batch converters for several years that could convert Wav to MP3
and MP3 to Wav. We've even had the ability to batch apply some effects, one at
a time. Now we've more than gone crazy with what you can do hassle free with your
files.
First, the whole idea of a Batch Transformer is to do an operation once and have
the Batch Transformer do it to 2, 5, 10 or 100 files at the same time. So this
takes most of the work out of converting files or batch tagging them or anything
you want to do to multiple files. OK let's check out the highlights.
Arrow 1.) Batch convert just about any group of WAV files to MP3 in any
bitrate you like or a bunch of MP3s to WAV fast and easy.
Arrow 2a.) Choose any effect here in
the list, OR CHOOSE AS MANY AS YOU LIKE to apply to the files you've loaded. So
you can normalize them all, you can amplify them all and you can add echo or even
use any of the filters on them all. So unlike prior versions, you can do as many
effects and filters as you like at one time. You're not limited to one effect
or filter. This is all new.
Arrow 2b.) And it gets much better.
Now for each effect that you put a check in the checkbox, you'll get a drop down
menu that lets you specify how much of the effect you want to apply. If you choose
10 effects or filters, you'll get a separate pull down menu to choose how much
of EACH you want. This is all new.
Arrow 3.) If you use iTunes or any other MP3 jukebox on your computer you're
going to love the time you save with the Batch Tagger. So picture this. A record
or cassette has 10-15 or so tracks. Why type the album info, artist info, year,
Genre and comments for each. Type it one time only here and batch tag
the entire group at one time fast and easy.
Arrow 4.) Many of our
DAKonian friends use our system for converting Church ministry tapes they give
away or motivational tapes they sell. OK what you can do in this section is use
a common Intro, a common Exit or a Mix over all the tracks you are converting.
So if you have an introduction or some standard music for the beginnings or ends
of your CDs or MP3 files, you can just load them here and every single track you
convert can have the same introduction, ending or mixed background track. Or all
3. This is super powerful and 100% all new.
Oh, there's more, like giving all the tracks a common name and numbering them.
But now you know the highpoints of DAK's all new dramatically improved Batch Transformer.
|
Your
Bonus Program 6.)
Tune Library Automated Jukebox.
Like Channel Surfing ON TV, Now Surf All Your Tunes.
 |
Now you're just a click away from listening to any tune you own. Load them
in the Tune Library and play them, sort them, enjoy them. Now you'll have all
your tracks at your instant control.
Here's what I love to do. I just surf from one track to another. No CDs to load.
I take a track from the Limeliters, one from Oliver and one from Annie Get Your
Gun.
Here's the point. When you load CDs, you can play any track
on the CD with just a click. But when you open the DAK Tune Library Jukebox, you
can have all your tracks that you own ready to 'channel surf'. It really is literally
every track you own ready to play with just a few clicks.
This is AWESOME.
|
Your
Bonus Program 7.)
Rip
CDs To Your Hard Drive - With 'Benefits'.
|
DAK's CD Ripper is special. It's like the line, "friendship with benefits".
It does much more than just Rip CDs. Why do you want to rip CDs to your hard drive?
With DAK's ripper you can rip CDs to your hard drive to edit them, make compilations
with tracks you've copied from LPs and cassettes and much, much more. Many DAKonians
need to change the speed, add a measure or take out a measure for dance or exercise
routines or to use extracted melodies in your PowerPoint presentations, for ring
tones or for many other reasons. With DAK's Editor which you're getting with the
system, you're not locked out of your music any longer.
Most modern CD Rippers will rip CDs to your hard drive and even name the tracks.
No big deal. We add 2 big extras that are really worth having. If you're ripping
to put tracks in your MP3 player, then you'll love the fact that the ripper can
apply all the MP3 tags for most CDs. It's a great time saver to have all the tags
added automatically for you.
And the big, big deal is 'Preserve Track
Order' which is something I invented. Here's the problem. When you load anything
in Windows it alphabetizes it. Then you'll find that the Overture is with the
Os, not at the beginning. All the songs on a CD that were in one order on the
CD, will be alphabetized on your computer. It's a big problem. But we have the
only solution I've seen.
When you rip CDs using my Advanced Ripper (we give you a simple one too), or if
you use the DAK Playlist Manager, we add a number ahead of the track name as we
rip so that Windows can't mess with the order of your tracks ever again.
It's a perfect solution to a Windows Problem. Now you'll have the tracks you want
in the order you want them from now on, on your computer, in your MP3 player or
anywhere you take them.
|
Your
Bonus Program 8.) Is A 2nd CD Writing Program
Make MP3 CDs & Back Up Your Tracks Big Time On CD or 4.7 or 8 Gig DVDs. Plus
Blue-Ray Too.
 |
I hope you're good about backing up the files on your computer. After all,
it's all about the music. And, you don't want to lose yours. We've had an MP3
CD burner in the Editor for a year. But this one adds the latest powerful folder
feature too.
You can burn folders of MP3 tracks to CD, organized by artist or album and then
it's easy to navigate to the artist or album you want. 10 hours of tracks on a
CD is great. But it's even better when each folder is easy to get to and organized
like you want it. More and more car players support folders so I wanted to have
this powerful new feature for you now too.
But backing up your tracks fast and easy is the thing. Our New CD Writer
Advanced Program not only writes to CDs, but also 4 and 8 Gig DVDs and Blue-Ray
too. Now you can put 4 Gigs of your treasured tracks on a 25 cent DVD or over
8 Gigs of your music on a $1.25 8 Gig DVD.
Now you can make fast easy backups of your tracks hassle free. Just load then
in DAK's new CD & DVD burner and you're all set. Oh, and we support the new
Blue-Ray too, but those 25 Gig discs are still a bit rich for most of us.
My Green Arrows show that I've put 1114 MB of files with 3374 MB left to fill
out of a total of 4488 MB on my DVD. Wow, CDs seem so outdated now.
|
Your
Bonus Program 9.)
Song
Stalker Internet Recorder
Silence Seeking Program
|
This is the Holy Grail of Internet recording. Get separated tracks as you
actually record. And the Song Stalker is the best of the best I've seen. As you
record and as the Song Stalker sees the silence between tracks, it automatically
closes each track it's recording and begins a new track.
The Song Stalker is an Internet Recording Program. For records and cassettes
like any other silence sensing recorder clicks, scratches and hiss make the Track
Tracker above the better choice. But for digital Internet recording the Song Stalker
shines.
Plus the Song Stalker will automatically save your tracks in the folder of your
choice and not only does the Song Stalker automatically number the tracks for
you, but it lets you assign a prefix name so you'll easily and effortlessly know
what you've recorded and where it is. It's actually a separate program that's
now built into new DAK Wave & MP3 Editor/Recorder Pro.
The Song Stalker continuously monitors the Noise Floor of your music and looks
for the silence that connotes a track separation. When it finds the silence,
It creates a New Track.
It Names Your Track With a Prefix
And It Numbers your track for you.
It's like a robot that essentially presses a virtual stop button, names and
numbers the track, clears the screen and starts recording a new track. Wow, it
does a lot. And it does it all without you.
It's very sophisticated. But in short it looks for silence. It uses very sophisticated
algorithms to determine what silence really is. And it does a really good job.
It often reaches a totally automatic success rate of 7 or 8 tracks out of 10.
But have no fear. You can separate the few remaining tracks using the Wave Editor
itself or the all new Track Tracker technology that's just been added to the DAK
Wave & MP3 Editor/Recorder Pro.
Using the Song Stalker is super easy and super fast. And the recordings will be
flawless digital copies of whatever you want to copy.
|
Your
Bonus Program 10.)
DAK's
NEW PLAYLIST MANAGER
PRESERVE TRACK ORDER WONDER
 |
 The problem. Windows
sorts all the tracks on your computer, in your MP3 player and when your burn CDs
alphabetically.
That's
not the order you want for your musicals, symphonies or any of your tracks to
be in. For a musical, you want the overture as the first track.
For a symphony, you want the first movement. And for your favorite, folk, jazz
or rock songs, you want your tracks in the order they were in on the CDs, LPs
or cassettes.
Till
now, this was an unfixable Windows problem. Now, when you EITHER rip
a CD or open a group of files from your hard disk, the Preserve Track Tool will
assign a number prefix in front of the track name so that even when Windows sorts
it, your track will stay in perfect order.
It looks like this (see left arrow in picture above):
01My Track Name
02My Track Name.
But that's not all. If you have tracks from different albums you can tell the
Preserve Track Tool to assign a common Prefix so all the tracks stay not only
in track order, but with the album they belong to like this:
FirstAlbum
01Track Name
FirstAlbum 02Track Name
SecondAlbum 01Track Name
SecondAlbum 02Track Name
DAK puts your tracks
in perfect order and keeps them there in your computer, when you copy your tracks
to MP3 players and when you burn CDs. This is a major new breakthrough in Digital
music enjoyment.
Preserve
Track Order In Action
Here's a real life EXAMPLE
you can do yourself of Windows Sorting that ruins your enjoyment of the music.
I took my copy of Phantom Of The Opera and Ripped it to my computer. What you
see on the left is the actual ripped results that I got and you would get too.
As you can see the Overture came out as track 7.
IT'S
THE SAME WHEN YOU COPY LPs, CASSETTES or anything onto your computer. Windows
by default will put it in alphabetical order AND THERE'S NO SOLUTION that I've
found till now.
On
the right, you'll see DAK's Preserved Track Order in Action. It adds a small numerical
prefix in front of the name that tricks Windows into keeping your tracks in the
exact order that you want them.
It's
simple. It's fast and you can have it added EITHER when you rip CDs, or
use the Playlist Manager to PERMANENTLY CREATE TRACK
ORDER that will never change. It's a whole new world of finally having
your music stay in the order it's supposed to be in from now on.
Print
Tracks & Playlists Instantly.
This is big. Sure using your
burner software you can often print a track list when you burn a CD. But there's
been almost no way to print a track list for the tracks you keep on your computer
or load into an MP3 player.
And, with several hundred tracks
going into an MP3 player these days, how will you ever know what you have?
Now
just load the tracks in the Playlist Manager. There's nothing special to do. If
the tracks are on your computer, you can load any MP3 or Wav files.
Anyway
Click Print and you'll instantly have the entire list in Window's Notepad. Then
just click Notepad Print for a printed list, or save the file and you can import
the text file into any fancy label printing program you might have. Any good one
does have import.
You'll
really appreciate the printed tracks. I carry the printed track lists in my
car for my 12-disc changer and in my briefcase for my MP3 player.
Plus it's great to have on my computer so I can instantly search it to see where
a particular song is located. This is a great tool.
|
Your
Bonus Program 11.)
Voice
Over PRO
Lets You Sync Your Voice LIVE With 1 or 2 Previously Recorded Stereo Tracks.
 |
I want you to get familiar with the Voice Over PRO interface. It's split into
4 parts. There are 3 Wave Editors, the 3rd of which is the Recorder and the Master
controls.
It's really easy to use and we've made it super easy for you to use it to make
really terrific mixed music and Voice Over recordings. OK here we go:
Arrow 1.) This is the 1st editor. You'll load the background or first layer
of content in this editor.
In other sections we'll explore the details but this is the master where your
final mixed effort will end up. You do the recording in Editor/Recorder 3 below,
but the final mix that you'll save will be here, in what we call Master File 1.
Arrow 2.) This editor works for playing exactly like 1 above. Honestly,
most of the time you won't use this because you'll probably be just mixing two
files at a time. But, when you want to mix 3 stereo tracks together, this is where
the 2nd track will be loaded. And remember your Voice Over PRO like any other
Multitrack Mixer keeps each of the 3 stereo (6 Mono) tracks totally separate but
100% synced till you click Mix.
Arrow 3.) This is the recording Editor. It's very similar to the two editors
above, but it adds live recording capability. This is where you'll record with
your microphone or other source. And if you want to record many tracks, you'll
record them here then load them into 1 or 2 above to mix them with something new
you record. There are two ways to record, (the two red buttons) but we'll explore
them later.
Arrow 4.) This is the master section. When you click the play button here,
all 3 editors will start to play in perfect sync. This is STILL BEFORE you mix
them and combine them into 1 professional stereo track you can burn to a CD or
create as an MP3. But, when you are thrilled with your effort, just click the
Mix-em button on the far right and then you'll recreate a perfect mixed copy that
will end up in the top window for you to name and save. That's pretty much all
there is to understanding the concept.
It does 100 times more than this, but we'll explore the details in the tutorial
that comes with the Upgraded Wave Editor with Burner and Voice Over PRO.
|
|
 |
Your
Bonus Program 12.)
Track
Tracker - The Really Big DAK Difference.
The Tracker Separates Your Songs Like Magic.
The
5 Track Trackers Do Use The Editor, But Are Separate Programs.
 |
OK, it's a fact.
You need to separate the records and cassettes you copy into tracks.
What that means is that each song, movement or chapter really needs to be a separate
individual digital file. You see there's no fast forward or rewind on CDs, so
you jump from song to song, movement to movement or chapter to chapter.
Plus, you make tracks so you're just one click away from keeping the tracks you
want and deleting the ones you don't. Plus, you'll make CDs and MP3s with just
the tracks you want in just the order you want them.
The CDs you make
with DAK's system will be just like the CDs you buy in the store with programming
and everything, except they will have the tracks you want in the order you want
them.
Here's What's Bad In Other Systems
Most people don't know about the tracks, so if you get an all in
one copier, either you get no tracks at all, or you have to sit and stop recording
at the end of each song and start again. If you miss one you're dead. It's really
incredibly time consuming and not reliable.
There are software programs where you have to sit and listen for the tracks and
click a track button to make a new track as you record. They are just about like
all in one and require you to monitor everything every single second. God forbid,
you miss a track, you really need to start over.
There are silence sensing programs that listen for the gaps between tracks on
your records or cassettes. We have one too, but we only recommend using it for
Internet recording where there is no noise like hiss or record pops to stop the
sensor from seeing the tracks. We find at best you get 70% of the tracks separated,
then what do you do with the ones that didn't get separated or the ones where
the track was separated during the actual music because there was a quiet part
that the program mistook for a track so you end up with 2 tracks for one song?
Finally there's the old standard. You use an editor and highlight each track visually
and then do a File/Save Select As and give it a name and a place to be stored.
This works great but takes about an hour or so per album. Of course DAK's editor
does this great too. But it's not the best, fastest, or easiest way to separate
your tracks.
Here's What's Really Good With DAK's Track Tracker System.
OK, forget spending an hour, 1/2 hour or even 5 minutes. The DAK Track Tracker
gives you 1st time every time perfect track separations in about 2 minutes. It's
super easy. It works 1st time every time and you'll never go back to manual
track creating again.
All you do is zoom in, click wherever you want a track. Then let the Tracker do
its thing. The whole process takes just about 2 minutes like I said and you'll
have perfectly separated, numbered tracks ready to go. See how easy it is in the
movie I've put right here.
See The Track Tracker Movie. It plays right on your Web page.
|
Your
Bonus Program 13.)
No
Wasted Time Baby-Sitting Your Recordings.
Now, It's All Automatic.
 |
Don't sit there and monitor your recordings, unless you want to. You don't
have to worry about the end of the record or the end of a tape. Or the end of
an Internet broadcast. Just set the Recording Length Timer and relax. If you get
a phone call, or get distracted or busy, the recorder will stop automatically
for you, no problem.
This is big. It's groundbreaking. It's going to take the hassle out of recording.
We've just added a Set and Forget Timer to the New Wave Editor Pro. Why do you
need it? Now you don't have to baby-sit your recordings. Most LPs are about 20
minutes per side. Cassettes are 30, 45 or 60 minutes per side.
Just choose a time a few minutes longer than the side of your record or cassette.
Click Timed Start, then start your LP or tape and go do something else.
You no longer have to keep an eye on when your recording will be finished. Now
you can simply come back any time. Save your file. Separate your tracks. Edit
out talking. Or, do whatever you want to do with your music.
IMPORTANT
NOTE: Intro & Exit Blank Space Is Deleted Automatically. Unlike using
a cassette deck you don't have to sync the start of the recorder with the needle
drop or cassette start. Just leisurely start the recorder and then start your
turntable or cassette deck. Same when you're done. Don't go flying across the
room to stop the recorder.
Why NOT? Well when you use my Track Tracker to separate your tracks, it AUTOMATICALLY
discards all the blank at the beginning and end of your recording. Welcome to
21st century digital recording.
Now you can concentrate on your music, not the act of recording. It's all automated
for you.
I've never seen a Length Timer incorporated into a Wave Editor before. This is
a revolutionary improvement that will really free you to record while you do other
things.
It truly is a mega-time saver for all of us. Now you can convert all your Records,
Tapes and Internet Radio easily and effortlessly without baby-sitting the recording
any more.
|
Your
Bonus Program 14.)
Real
Time Recorder, Timed Record & Extended Timed Record.
 |
The real time recorder has been a DAK favorite. It's simple to use. It records
direct to your hard drive with no temp files and it has DAK's no baby-sitting
countdown recording timer so you can just leave and the recorder will record and
stop when it's done.
It's used for recording from the Internet or from records or tapes. It's fast
and easy to use when you don't want to use the editor. And for long recordings,
it's the best as it doesn't save to RAM, it goes directly to your hard drive as
it records.
Plus, now we've added the USB Sound Card Workaround we've developed called Playthrough.
What that does is let you hear the sound of what you are recording during recording
with either the DAK USB sound card audio adapter which we provide for you if you
have a notebook computer, or if you have your own USB Turntable. Now you can actually
hear while you record.
It's a shortcoming of USB sound cards that we've now overcome with our new workaround.
Now you will hear without having to hook headphones or computer speakers to the
DAK Interface Mixer.
|
Your
Bonus Program 15.)
More
Timed Recording- Scheduled Time Record While You Are At Work or Asleep. - Like
A VCR/DVR For Sound.
 |
Don't miss those special shows on the Internet, or playing on anything connected
to your computer. I've added a separated special recorder so that now you can
set a scheduled timer to record that broadcast you don't want to miss totally
automatically. It will start and stop on its own.
This is a one event
timed recorder we've added to let you capture those great shows you'd miss while
you're at work or asleep.
And you can connect an AM or FM radio to the DAK Interface Mixer and capture those
shows too. Think of it as a one event VCR/DVR for sound. Now you've got an instantly
available recorder so you won't miss those special shows any more. Then you can
listen to it later on your computer or burn a CD, or put it in your iPod or other
MP3 player and take it with you.
|
Your
Bonus Program 16.)
MP3
USB Recorder - Now You Can Hear WHILE You Record With DAK's USB Adapter Or Your
USB Turntable.
 |
It's a problem. A USB turntable or our USB audio adapter overrides your sound
card and takes over the audio of your computer. That's great for recording, but
it's not linked to your sound card's connection to your speakers, so while you
can record flawlessly, you can't hear while you record, which is a bummer. That's
one of the major shortcomings of all the USB turntables I've tested.
So till now, we've made it possible to monitor what you record by plugging headphones
or computer speakers into the front of the DAK Mixer Interface. And that works
great.
But now, through some very innovative programming what we are doing is using a
cute little computer trick called Playthrough to overcome the USB sound card shortcoming.
It's really a very neat programming trick or workaround, but what we do is capture
the signal as we record and concurrently send a copy of it to your normal sound
card so you can hear it.
It works perfectly. It has no effect on your recording, or anything else, but
you can hear as you record so no headphones or speakers need to be attached to
our mixer.
Plus this is one really neat recorder. It uses 2 of our new displays. The peak
Reading VUs for record and the Spectrum Display for playback. So while it really
doesn't matter to anyone but me, it's a treat to watch as you record.
Oh, and you can use this recorder and its no baby-sitting timed record for recording
any inputs into your computer or from the Internet too. Just don't click on the
Playthrough Button if you're not recording from USB. It's a very powerful recorder.
|
Your
Bonus Program 17.)
Tell
Me About That Track. Oh, and Play It For Me too.
|
This is an awesome improvement on our old Track Info Button. Now you can just
select any file on your computer and learn everything you ever wanted to know
about its properties, tags, size and more, plus listen to it too with DAK's cool
new player.
You'll see the file name, tags, number of channels, bit rate and much more. Just
check it out. Now you'll be able to see all the properties of any Wav, MP3 or
WMA tracks you own.
It's an easy fast way to check out any track on your computer.
|
Your
Bonus Program 18.) Yet, 2 More CD Writers
DAK's
Easy Audio CD Writer Program.
 |
Your computer came with
CD burner software. And it probably works fine. But, it's probably a general purpose
program that does lots of things other than just burn flawless digital audio CD
copies of your music.
Because
it's made to do so many things, it's often hard to find the controls you need
to actually burn audio CDs. You need to be sure to Finalize/Close your
CDs and to lower the burn speed to one half if you are burning for older car,
home and portable CD players.
I've made this CD burner
close the discs automatically so you don't have to worry about it and I've put
the speed control right up front.
And use our Playlist manager
to set up the playlist order, then ours keeps the Preserve Track Order you selected
when you ripped your CDs or used Preserve Track Order in the Playlist manager.
So
add a track, a few tracks or all the tracks in a folder or from several folders.
Move any track within the list anywhere you want. Remove any track. And combine
Wave and MP3 files to burn your CDs. It's the easiest CD Burner software ever,
because it does all the heavy lifting for you.
|
Your
Bonus Program 19.)
Drew's MP3 Fast Tag Manager & Computer Search.  |
DAK's new MP3 Tag Manager and Computer Search program allow you to utilize
the newest MP3 data enhancements plus gives you a simple, convenient and fast
way to search your computer for BOTH the MP3 and Wav files that you might have
misplaced. Plus you can then easily identify where the files are and navigate
to them.
Note: Many of us who convert LPs and cassettes to MP3 and wave occasionally
save a file to the wrong folder or forget where we've saved it. Now your music
will never be lost again. The Tag Manager will scour your computer and find every
track. And it will show you the path to your track so you can open it to edit
or move it if you like.
For the MP3 files, now you can see all the data that's part of the files and even
load, copy and save the album pictures that often accompany new downloads and
MP3 files that you buy. Many of the emerging MP3 players now can show these pictures.
So it's good to be able to edit them, or even export them so you can use them
for CD album covers and more.
So, you can see, change and add tags to any of your MP3 files. You can add album
pictures, or pictures of yourself or kids if you like. Now you're not locked out
of your MP3 files any more. Now you can add, change or alter the tags any way
you want.
Oh, and part of the tutorial for the MP3 Tagger, I show you step-by-step how to
find free album covers on the Internet that you can use for your MP3 files or
to print jewel case covers or CD labels.
|
Your
Bonus Program 20.)
Album Maker. What The Heck Does That Do?
Yet
Another Utility That Uses The Editor, But Is Still Important.
 |
OK in digital you want tracks, not single file multi-track albums. So frankly
I've had this program on the back burner for some time. Because if you put 5 or
10 tracks together with no breaks or pauses (although you can put in a 3 second
pause by checking a box if you like) you won't be able to program a CD or jump
around to the tracks you actually want to hear. Of course, No Pause Music is great,
but not at the expense of programming and track choosing.
Till Now.
With DAK's new No Pause Burner also included in the new Editor, you can build
albums of as many tracks as you like fast and easy. Then use the DAK Track Trackers
that DO break your masterpiece into tracks, but DON'T put in any pauses.
Finally, use the No Pause burner and you'll have a 100% perfect CD with no pauses
or breaks, but with all the tracks you've put in to let you program your CDs and
jump from track to track any time you like. That's why I've added the Album maker
to the new DAK Editor.
To use it just load your first track into the editor. Then Open the Album Maker
and it will let you quickly and easily add track after track after track. Then
just save the final file and you're good to go. You don't even have to unload
or reload the editor. Just put in your tracks next and burn your CDs. Perfect.
Arrow 1, shows that I've already loaded a 2nd track. Arrow 2 shows the Button
I Click to choose and load the next. I can have 3 second pauses between tracks
or not and I can even have a combination of breaks and no breaks if I like.
|
|
|
THE
DAK WAV & MP3 Editor
Exploration Begins Here |
|
|
Easy
Recording - You Can Do This.
 |
It's so much easier than it was in the old days,
recording with cassettes. You don't have to worry about the needle drop or timing
or anything. Our system will automatically discard all the blank at the beginning
and end of your recordings when you make tracks. Digital is so much easier than
in the old days.
Just click Record to record, Play to play and Stop to stop. We even have a Record
Wizard to let you do test and set your levels. It couldn't be easier.
|
|
|
DAK
Effects Just Got Better & Faster Instant Preview Too. Check This Out.
|
What if you'd like to add some echo? Maybe you want
to increase the volume of a track, add drama by using the expander or cut the
dynamic range with the compressor? Or you can add chorus and make yourself sound
like you're a choir or add delay or any of the effects you see above. It's all
easy. But just having effects in an editor doesn't make them easy to use.
Now you can truly get the full value of DAK's digital effects like never before.
Yes, I'm excited, let me tell you why. In the past, with most good editors you
had access to some or even many effects.
But check this out. First,
with other editors, you'd have to choose the effect, maybe even the amount of
the effect, usually with Presets so you have only a few choices as to how much
of each effect you wanted to have. Well No More. I've added continuously variable
sliders so you can get just the amount of any effect you want in 1% increments
without having to settle for the amount in a preset the programmer thought you
might want to have.
Plus, we've also added Preview to the effect. Just click Play and you'll
hear the amount of the effect you've chosen. If you don't like it, just move the
slider and Click Play again.
Now you'll get the exact perfect 1% resolution of the effect you want. No more
guessing. No more wasted hours.
No more loading and unloading and undoing. Just Click Play and you're set.
Then Click Apply only when you're totally thrilled with the micromatic precision
that you've been able to achieve with absolutely no hassle or wasted time at all.
Now you won't have to compromise between how perfect you want your music to be
and how much time you have to waste. Now it's super easy. Now it's super fast.
And frankly if I look in my crystal ball, I don't see any other improvement that
can be made for applying effects and filters that is better, faster or more professional
than this one is.
|
|
|
Fade
In, Fade Out -Fast, Easy & Super Variable.
 |
Change your Fade Ins or Fade Outs instantly and easily.
Now you can get rid of long applause or talking or change anything you don't like.
It's never been this easy before.
Do This. Highlight the area you want to fade. It can be a short area or a long
area. It's 100% up to you. So if you choose a short area you'll get a sharp fade.
If you choose a large area you'll get a gentle fade.
Then just choose Fade+ or - and you're done. It's just that simple to make your
own professional, digital, perfect Fade Ins and Fade Outs from now on.
Oh, and you want to do it really fast? Just click the auto-fade and it will automatically
fade the intro and exit without you even having to mark the areas to fade. It
will make a studio perfect set of fades for you instantly.
|
|
|
Edit
Even Part Of A Word Out In Seconds.
Here I'll Change Isn't Into IS
 |
Wow, can you believe how easy this is to do? You
can zoom in to even 1/4 of a second. You can find just the word, the Ah, UM or
any part you don't like and edit it right out, fast and easy. It really takes
almost no time at all.
|
LIVE Recording & Editing MOVIE DEMO
|
Plug in your Mic. Cue up your record. Open any existing music
or voice track. Here's a quick example of removing HALF
A WORD from a sentence so you can see how it's done.
Click
To See How It's Done |
And with DAK's new editor, there's nothing to learn that you don't see above in
my little animated picture. It really is just this easy. Of course you don't actually
see the words I've put there for you in red, but you can sure see the waves that
make the words and you'll hear them too.
It really is just this easy to edit. You'll have a ball. I took an old song called
Tell Laura I Love Her and edited out all the unhappy parts (if you know the song
you'll know) and played it for my daughter-in-law, Laura, as a present. We had
a ball.
|
|
|
Virtual
78 Turntable.
Play 78s On Your 45 RPM Turntable
Convert 78 RPM Records
On Your 45 RPM Turntable Like Magic.
Copy Cassettes AT Double Speed 2X And Digitally Decode Them.
 |
If you're like me, you have a bunch of 78s that are just sitting around. And your
really good turntable doesn't play 78s. So, until now, you've had no way to copy
them to CDs let alone listen to them at all.
Now you can. DAK's all new 78 Automatic Virtual Turntable Converter lets
you copy your 78s to your computer and then with a single click, listen to them
again at perfect 78. It's great. It's easy and yes, you can easily restore them
by removing the surface crackle and clicks pops and scratches then burn them to
CDs too if you get DAK's Click, Scratch and Hiss Assassin program offered along
with the Editor.
But what about the Needle? You can use DAK's standard
elliptical diamond stylus to play the 78s. You CAN NOT use a 78 stylus on LPs
as it would ruin the LP. If you have more than about 25 78s, we do have a
78RPM Cartridge that pops onto our PRO DJ turntable. But fewer than that, just
use the stylus we ship and you'll get flawless copies.
OK, here's all you do. Get out your 78 RPM records. And put one on your turntable.
Select 45 RPM and you're set.
Click the Record Button on the Wave Editor/Recorder and then put the needle in
the groove.
 |
| Just
choose 45 RPM on your turntable and your 78s will soon be flawlessly copied to
your computer and on CDs for you to enjoy from now on. |
After you've played one side of the 78, Click Stop, name and save the file.
OK, now the fun begins.
1. Click Effects Menu/Speed Decode
2. Click 78 RPM Converter.
And like magic, the 78 RPM record that you played at 45 RPM will be converted
to the correct speed. Click Play and you'll see how GREAT it sounds.
Save
Time On Cassettes Too.
Now if you have a high speed cassette dubbing deck or a cassette duplicator, just
play your cassettes at double speed and after you record, just click Speed Decode/Half
speed and the cassettes will be digitally returned to normal flawless digital
sound.
Now with the DAK automatic timers and the 1/2x speed decode you really can process
hundreds of cassettes super fast and with perfect fidelity.
Plus, if you've got any old tapes that were recorded at 15/16ths or 1-7/8s, use
the 2X speed decode to return them to normal speed. It's digitally perfect.
So with DAK's automated speed decode choices you'll make digital copies that could
never have been made in analog. And with digital speed decode, there's no loss,
so you'll get 100% flawless decoded copies.
|
|
|
How
Many Colors In Joseph's
Coat Of Many Colors?
How Can You Listen To A Speech In 1/2 The time?
Speed Listening - Transcribing- Changing Key
|
Digital makes all things possible. If you want to
transcribe some lyrics from a song or transcribe a speech, lecture or you name
it, choose DAK's new Stretch feature in the editor.
You'll slow down the talking or singing as much as you want WITHOUT CHANGING
THE PITCH OR KEY. So, if you want to transcribe the lyrics from a song, this
makes it super easy. My wife wanted to make a list of the colors in Joseph's Coat
after we saw the musical. This made it easy.
We saw the Irish Rovers last month and they have a great song called 3 Jolly Rogues
(See my picture). In it they drink about a dozen different types of liquor. It's
kind of like the 12 days of Christmas with different drinks. We'll, we made short
work of that list too. Now we've shared the list with our kids.
And you'll make short work of anything you want or need to transcribe, whether
it's a speech, a song, a lecture or testimony if you're a court reporter. Now
it's easy.
Speed it up too. What if you
want to listen to a speech but you don't want to spend all the time it would take.
It's a fact that you actually comprehend better if you speed it up because your
mind doesn't wander when speech is faster.
Speaking is generally slow. Anyway, just slide the slider to make anyone speak
faster and you can listen in the editor or save it as a wav or MP3 file and take
it with you. It's all easy and you'll not only save hours, but frankly be able
to learn things you simply didn't have time for before.
And fast
or slow, the pitch/key will stay the same so you'll have perfect intelligibility
regardless of whether you go fast or slow. Stretch Plus and Minus are very powerful
parts of the DAK Wav and MP3 Editor Pro.
Oh and just so you know, there is also stretch with frequency change so you
can also adjust the key or pitch of the music if you like. Then you can sing
along or mix music that 'was' in different keys. It's all in our powerful new
editor.
|
|
|
How
To Select In DAK's Wave Editor.
By The Way, This Is Just One Of Our Tutorial Demos.
Selecting is a basic Windows Function. It's the first
step to using many of the Editor's powerful functions. So, spend a few minutes
getting comfortable making and using selections.
You'll use selections to apply any of the filters, effects and editing powers.
You'll use it to select a part of a file to delete or to copy. And, you'll select
a part of a file or track that you want to save and then by going to File/Save
Select As you will save just that one part without changing the original file
at all.
How do you select?
Put your Mouse Cursor in between the upper and lower tracks. Hold down the left
button and drag till you have the part selected that you want to work on, delete
or alter. It will turn red like you see above.
Then, just choose any function and Left Click it from any of the menus and
the editor will perform the operation you want.
And remember, if you don't like what you've done? No problem. Just click the UNDO
Arrow and it will be undone so you can try again. This makes it really easy, fast
and lets you experiment all you want because for most operations, you're just
one click from undoing anything you've tried. So, don't be afraid to experiment.
It's the best way to learn.
|
|
|
|
If
you can hear it, you can record and edit it fast and easy.
